masterliquid pro 120 vs corsair hydro series h80i v2

The H80i v2 had to be fitted to the rear of our case as it was to large to fit in the roof. The radiator measures 154x123x49mm, and has a total of 12 water channels with a fin density of 21 fins per inch, making it quite dense. We will of course be removing it for testing and using our Noctua TIM as always. the Cold head contact face is copper and comes supplied with TIM applied. The Pump assembly also has a pewter plaque, and can be illuminated with RGB LEDs via the Corsair link software. The wide diameter pipes are beautifully braided in gloss black braid, ansd we have to say look stunning. The rad is finished in satin black and has nice silver/pewter coloured Corsair logo plaques attached to each side. This pretty much means that it's unlikely to fit in the roof of a case unless there's a significant offset, but should fit in the rear of most cases. The Rad itself is quite a chunky monkey at 49mm thick, which when combined with a pair of 120mm fans will give the assembly an overall thickness of 99mm. It goes without saying that all other fittings required are included. The H80i v2 comes with the fitting for Intel processors already attached, but Corsair do supply an AMD fitting. the two white boxes you can see are adding further protection to the pair of 120mm fans. The Cooler and the other components are protected by plastic bags and the now familiar formed egg box card. It comes neatly packaged in a striking yellow and black box, the exterior of which has images of the cooler as well as pertinent technical data on the product. The H80i v2 is a 120mm fan based AIO from Corsair. Technical Specification Radiator Dimensions

Masterliquid pro 120 vs corsair hydro series h80i v2